This can happen when you do updates on your computer. It’s a quirky little box but, once you get it working, it’s pretty cool, honest. I had just bought it and it worked fine for a while but suddenly it croaked…i would test another HDMI cable and see if that does anything for you! I have tried multiple HDMI cables, I have tried the (y +rt reset) i have tried navigating blindly, but nothing is working. Verify that your television meets the Apple TV minimum resolution requirements. The WDTV never had any problem previously when switched between one tv and the other until yesterday. HDMI cable then I would say the Port on the TV has quit working. Link to post. Also try changing the hdmi port on the tv if there is more than one. I’ve left it off the power source for around 8 hours yesterday while I was at work as well and only plugged it back it when I started testing on it again. It always has been the case that the digital TV has locked into an incompatible HDMI resolution. Secondly, this sounds like an HDMI HDCP issue. It is a matter of resetting the digital TV to correct the HDMI resolution. Hi, My WDTV Live won’t display anything through HDMI on my Samsung 6 series LED TV. I've read up and 99.9% of similar issues appear to be the HDMI board or something similar. Did you switch the output of the WD player back to HDMI output? Ok so, i have had the same xbox in the same tv for years now, and magically one day it has decided not to work. Does anyone have any idea on how to fix this? A bit of a hassle and shame since the closest one to me is in Singapore (I’m in New Zealand) and it’s going to take around a month for a replacement to reach back to me so I bought another unit yesterday and that one works without a hitch. This site contains user submitted content, comments and opinions and is for informational purposes only. Powered by Discourse, best viewed with JavaScript enabled. Lowering the resolution on the DVR does it every time. I’m pretty sure it would still work via the component leads as composite works fine. If it works on another TV with the same I had it connected to a CRT TV using the composite cable but when I connected it back to the LED TV, it’s gives a message “mode not supported” on the LED TV and nothing displays. Ive tried changing the resolution and function f5, f6 keys. This typically occurs because the screen resolution hasn't been configured on the PC properly to allow the signal to be read by the Samsung. Video Mode Not Supported or Signal Out of Range error Search the community and support articles. I’ll definitely try it tonight and see if it makes a difference. hdmi_ignore_hotplug. I tried doing a factory reset as well but I noticed that you’re supposed to hold the press on the button for 10 seconds while I only held it until the power light goes off. When I upgraded to HDMI it was from Component, not Composite (in fact, I’ve never tried Composite with the Live). Hello! It has worked fine for about a month, but last night the TV started giving me an "unsupported mode" message. The screen is fairly small and I tried to hook up an external monitor I have. Check to verify that your TV's video input matches the HDMI connection. It is not automatic on a tv. Share this post. However when we tried it on my LG plasma in my bedroom it worked first time. The HDMI cable is not included with the PS3. I'm trying to connect my tv to my comp through HDMI. When I tried to set it up the External monitor says video mode not supported. Not supported mode on hdmi My tv all of the sudden displays not supported mode on my tv connected to an hr44 genie *I am an AT&T employee, and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions. Press for one second to reset to factory default. Perhaps overkill but I’m not having any issues, and the last step has definitely solved weird behaviours for me before (certain file types not playing). My normal routine following firmware updates are the above 3 steps in sequence. When we plugged the PS3 in via the HDMI cable the TV gives me a message on screen of "Mode Not Supported". Are there display setting I should change on my … I had the same problem a while back and i realized my cable just failed so maybe its the same here hope i helped. I recently bought a Shuttle SG33G5 with on board HDMI. I have been using the same Pavilion laptop and Samsung TV for several months, and I used to be able to plug my computer into an HDMI chord to project the screen onto the TV. Still not working. I tried to download a driver and got a Generic PnP Monitor driver. Yesterday i started the ps4 and tv up and everything worked fine when suddenly,i lost video signal "mode not supported"? But here are some things to try, in sequence until either the TV works again, and you can stop, or you get to the end of the list:-. I have a Dell Inspiron 11 2-in-1. I had a bad HDMI port on my TV as well that just went out one day. I had the exact same problem and it turned out it was a faulty HDMI cable. Had to go get an HDMI to VGA adapter to make it work. None of the settings were changed which is why I’m confused on why it suddenly wouldn’t work. What you can do is temporarily hook up the DVR to the monitor using the VGA or Composite output which would allow you to view the menu and lower the resolution on the monitor. If so, set them back to AUTO and see if that helps. The sound continues to come through the amp from the input, Fire TV for e.g. Re: Dell Inspiron HDMI Samsung Television (mode not supported) Make sure you are using the remote on the tv to switch to the correct HDMI input. The acer recognizes the tv but the tv says mode not supported and no time information. Press and hold 10 seconds to toggle between NTSC and PAL. I’ve just tried using the component cable and it works fine although it only displays at 720p. When I go to play something recorded on the DVR, I can hear it, but it says HDMI Output is not supported. You going to RMA the unit anyway and have two? You can then lower it until it is visible using the HDMI. If it works then the port on the xbox may be faulty. However when we tried it on my LG plasma in my bedroom it worked first time. In other words, composite output mode will be used, even if an HDMI monitor is detected. Once I disconnect the HDMI cable, it goes back to normal. I have an acer aspire one d270. Every other HDMI device ive got works fine in the same port on the tv (only got one) and the ps4 works with the same cable on my other tv? I have an HP Envy 17 (HP ENVY - 17-u163cl) with an external monitor connected via HDMI to HDMI already. If that fails, you can wait for others to chime in! Question: Q: how to fix hdmi output is not supported on apple tv? I’ve made sure that the HDMI settings are set to auto when I plugged in to the other CRT TV but upon connecting it back on HDMI on the LED TV, it is still displaying “mode not supported”. Hi, I recently bought a Yamaha RX-671 Receiver and have been using the HDMI passthrough from a few devices to the TV. Refer to the manufacturer's user guide for assistance with changing your TV input or picture mode. When I hook up the iPad via HDMI lightning connecter, I can see my iPad screen and the app. When i plug in a HDMI cable or even use the HDTV switch on my component cable, the dashboard screen doesn't appear. 2) If using an HDMI cable, disconnect and reconnect the HDMI cable on both ends when the cable box is unplugged from power (make sure it's secure on both ends). Also, try unplugging the device from the power source for 5-10 minutes. I am away from home and want to hook up my iPad to the TV so that I can see what I recorded on my DVR. When I use the HDMI cable it says the mode is not supported on the TV> This is only the case when I use my Samsung Tv's> - Answered by a verified TV Technician We use cookies to give you the best possible experience on our website. Cable Adapters (i.e., HDMI to DVI converters) - If you are using an adaptor (i.e., HDMI to DVI converter), try bypassing this adaptor and connecting the HDMI cable directly into the display. I am pretty sure it is a setting. Or attempt to use a different adaptor, as not … Dude. Hello, I hooked up my hdmi cable ps3 to my tv and it's said "mode not supported" and I did a test run on another tv and it worked fine, it's a HDTV, I just don't understand!!! Any suggestions? I have seen instances where the digital TV will not lock onto the WDTV Live HDMI signal. Am trying to hook it up to my samsung plasma through an hdmi cord. However when I have both the HDMI cable and the component cable connected at the same time, I get a flickering screen but it recognises the HDMI cable connection and shows the resolution as 1080p. ;). This thread is locked. I’ve actually tried another HDMI cable and it was doing the same thing. I was just wondering if the WDTV would be happier switching to HDMI if it were already in an HD mode. RE: HDMI Mode Not Supported. Mode not supported though.. usually that is something that comes up.. when say the video out, is putting a RESOLUTION that is TOO high for that device to support. The tv says "unsupported mode". I’m still curious on what the others have to say on this issue as I found quite a few people with the same problem while googling about it but none had a solution. :). Yes, if I remove the component cable then it reverts to no picture and yes, I’ve tried both the reset button on the side as well as the one within the settings menu with no difference to the HDMI problem. Hook up your PS3 to your TV with the HDMI cable. Have you got any other HDMI devices you could try on your tv to rule out a faulty TV? My WDTV Live won’t display anything through HDMI on my Samsung 6 series LED TV. Verify that the Apple TV's power cable and the HDMI cables are securely connected. Just wondering as well, with the RMA, would you have to get your own packaging material and will WD reimburse the postage cost? Thanks for the tip. Might this be a faulty HDMI port on the WDTV? Samsung LCD televisions have both HDMI and VGA ports. If there is a problem with the connection, a "Mode Not Supported" error will display on the screen. Yeah, like I said previously, I love the device when it’s working…so who knows, I might pass it on to my parents once I get the replacement through RMA. But that means that what I’ve done was right and should have reset the WDTV to its default settings and yet it was still not displaying anything. Are you able to obtain 720p or 1080i via the included component leads? There are 2 ways. , but the projector is just blue screen with an inconsistent message of either 'no signal' or 'not supported'. When plugged directly into the TV, all of my devices work. This FAQ will show you how to get rid of this error message. HDMI output not supported. I get "Signal Not Found" and "Mode Not Supported" messages when I try switch to the HDMIs connected to my receiver. Hi Scott, Having a message Mode/Input not supported in computer monitor means that your resolution was somehow set to a display resolution which is not supported by the monitor itself. :). In other words, HDMI output mode will be used, even if no HDMI monitor is detected. Might you have set the COLOR SPACE, Resolutions, Refresh Rate, manually? For HDMI Alt Mode, it supports all HDMI 1.4b features, including 4K resolutions, surround sound, ARC, 3D content, the HDMI Ethernet Channel, CEC, and HDCP 1.4 and 2.2. I see you already tried the hard reset switch on the side of the unit…  have you also tried the reset within the setup > system settings menu? (using a fine-tipped stylus or the unfolded end of a paperclip). this may sound silly but do you have the right input or source chosen on your tv?